Remove the burner component with care and clean it. Take special care to replace it in its original location. Make sure there are no bird or animal nests in the chimney above the burner. Remove the coils using a brush. The accumulation of dirt and dust will have a detrimental impact on cooling efficiency.
Maintenance
on the furnace is usually minimal. Make sure the outside vents are clear and
free of any insect or animal nests. Check to see if any inside vents are
blocked by carpets or furniture. Make sure heat runs through cabinets or under
the dinette aren't kinked or flattened if you have access to them. When
de-winterizing your R.V, it's advisable to service the hot water
heater during Spring Cleaning. The water heater should still be empty at this
point. Remove the plug on the water heater's outside and pour some water into
it until it drains out the aperture. Because the entrance is normally a few
inches above the tank's bottom, you'll need to use a little piece of plastic
tubing to syphon out the last few drops of water. You can also blow out the
last of the water and any debris in the tank with a piece of tubing connected
to an air hose.
Turn any
winter bypass valves back to their original positions, then disinfect your hot
water heater along with the rest of your water system. And get any debunked
parts rom Winnebago R.V Inspect the pressure relief valve
on the back of the water heater Allow the hot water heater, along with the rest
of your water system, to be sterilised by resetting any winter bypass valves to
their original positions.
0 Comments